Embedded Files
This is a partner project and both partners need to be involved.
Expectations:
Expectations:
Submit a google slide using the following guidelines:
Slide 1: Research - 5 screenshots of what you might make.
Slide 2: Brainstorm - 5 drawings from each partner of what you might make. (Scan and put them on the slide.)
Slide 3: 3d Model of your design.
Slide 4: Picture of your prototype.
Slide 5: Post Project Report
What part would you redesign and why?
How could you be a better partner?
Requirements:
Requirements:
At lease 3 sets of links. (Laser Cut) (3-4" in length.)
Utilize Snap Rings for the hinge pivot. (Use this model.) - Make a copy and import into your assembly.
Utilize #6-32 - 1/12" Nut and Bolt to attach with a Hex :
3d Print Handles (Partner A Creates the Model)
3d Print a Claw (Partner B Creates the Model)
Helpful Tips:
Helpful Tips:
Duplicating Parts
Duplicating Parts
Make a copy of an existing part so you can redesign. (The bolt and the snap ring have different diameters.)
Right Click and Duplicate Parts
Edit in Context
Edit in Context
Right Click and then click edit on context.
Standard Content
Standard Content
Nuts and bolts are standards parts and you can insert them into your designs.
Fasten Mate with Offset
Fasten Mate with Offset
Create Part Studion in Context
Create Part Studion in Context
Redesign of Teech based on point of engagement
Redesign of Teech based on point of engagement
Hollow it out to reduce the weight and material needed
Hollow it out to reduce the weight and material needed
Page updated
Google Sites
Report abuse